WIRE CLEANING. Achieve perfection.

Each customer has specific requirements on the wire’s level of purity. This is why our procedures after the drawing process are equally clean. Drawing agent residue is removed from the wire rod in two ways – conventionally, using the highly effective wet brushing, or with our new multi-stage cleaning process for high through-speeds. Both processes can be coupled with a filtration system to ensure continuous operation.

Wet Cleaning Machines

HSE-1300
Wire diameter (low carbon): max. 10,0 mm
(greater on request)
Wire diameter (high carbon): max. 10,0 mm
(greater on request)
Wire passing speed: up to 4,0 m/s

HSE-2800
Wire diameter (low carbon): max. 10,0 mm
(greater on request)
Wire diameter (high carbon): max. 10,0 mm
(greater on request)
Wire passing speed: up to 4,0 m/s

HSRT-2600
Wire diameter (low carbon): max. 10,0 mm
(greater on request)
Wire diameter (high carbon): max. 10,0 mm
(greater on request)
Wire passing speed: up to 18,0 m/s

TBM/2B-N
Wire diameter (low carbon): max. 8,0 mm
(greater on request)
Wire diameter (high carbon): max. 8,0 mm
(greater on request)
Wire passing speed: up to 8,0 m/s

Scroll to Top