WIRE DESCALING. Cleanliness invites speed.

Before the wire drawing process our machines clean the surface of the wire. This ensures speed in the subsequent process and brings savings too. Be it bending descaling, steel brush descaling or sanding descaling – thorough cleaning increases the drawing speed and the lifetime of the die. The more thoroughly this is done, the faster the process and the better the quality of the end product. Our descaling methods are available for almost any type of wire.

Bending Descaler

WEZ-1Z
Wire diameter (low carbon): 5,5 – 8,0 mm
Wire diameter (high carbon): 5,5 – 6,5 mm
Wire passing speed: up to 3,0 m/s

WEZ-1/65Z
Wire diameter (low carbon): 5,5 – 6,5 mm
Wire passing speed: up to 3,0 m/s

WEZ-3Z
Wire diameter (low carbon): 5,5 – 13,5 mm
(opt. 16,0 mm)
Wire passing speed: up to 10,0 m/s

BBE-3/8
Wire diameter (low carbon): 5,5 – 16,0 mm
Wire diameter (high carbon): 5,5 – 16,0 mm
Wire passing speed: up to 4,0 m/s

BBE-3/12
Wire diameter (low carbon): 5,5 – 13,5 mm
Wire diameter (high carbon): 5,5 – 8,0 mm
Wire passing speed: up to 4,0 m/s

BBE-3/17
Wire diameter (low carbon): 5,5 – 18,0 mm
Wire diameter (high carbon): 5,5 – 13,0 mm
Wire passing speed: up to 4,0 m/s

BDM-2S
Wire diameter (low carbon): 5,5 – 20,0 mm
Wire diameter (high carbon): 5,5 – 15,0 mm
Wire passing speed: up to 10,0 m/s

Sanding Descaler / Grinding Descaler

SEZ-2-450
Wire diameter (low carbon): 5,5 – 9,0 mm
(opt. 30 mm)
Wire diameter (high carbon): 5,5 – 9,0 mm
(opt. 30 mm)
Wire passing speed: up to 4,0 m/s

SEZ-4-300
Wire diameter (low carbon): 5,5 – 9,0 mm
(opt. 30 mm)
Wire diameter (high carbon): 5,5 – 9,0 mm
(opt. 30 mm)
Wire passing speed: up to 2,4 m/s

Brush Descaler

Ecoclean
Wire diameter: (low carbon): 3 – 10 mm
Wire diameter: (high carbon): 3 – 10 mm
Wire passing speed: up to 10,0 m/s

RWCB/400-2
Wire diameter (low carbon): 5,5 – 8,0 mm
Wire diameter (high carbon): 5,5 – 8,0 mm
Wire passing speed: up to 4,0 m/s

RWCB/400-3
Wire diameter (low carbon): 5,5 – 16,0 mm
Wire diameter (high carbon): 5,5 – 10,0 mm
Wire passing speed: up to 4,0 m/s

WBE-6L
Wire diameter (low carbon): 5,5 – 10,0 mm
(opt. 18 mm)
Wire diameter (high carbon): 5,5 – 10,0 mm
(opt. 18 mm)
Wire passing speed: up to 4,5 m/s

Scroll to Top