Process wires from 4 mm up to 18 mm.
Clean your wire from scale more than 10 times cheaper than shotblasting with the same quality. Preparing carbon wire rod before final descaling by means of bending descaling is a must.
Fully Autonomous
WBE
Brushing Machine
Brushing machine for mechanical final descaling — sustainable wire pre-treatment without chemicals.
- Working range 5,5 - 8,5 mm (18 mm)
- Wire passing speed up to 5,5 m/sec
- Running without downtime up to 3.000 tons of wire
- TCO (Total Cost of Ownership): < €2,50 a ton (metric)
Calculate my TCO & ROI
Get machine advice, expected savings, and a recommendation for your process. Calculate your savings today.
Play product highlights
Pause product highlights
Replay product highlights
Also see our other machines
Low-cost at high speed
Ecoclean
Brushing Machine
- Working range 5,5 – 10 mm
- Wire passing speed up to 10 m/sec
- Running without downtime up to 1500 tons of wire
- TCO (Total Cost of Ownership): < €1,50 a ton (metric)
The most effective
SEZ
Sanding Belt Machine
- Working range 5,5 – 34 mm
- Wire passing speed up to 6 m/sec
- Belt break safety/quality system
- TCO (Total Cost of Ownership): < €8,- a ton (metric)
Fully Autonomous
PCM
Coating Machine
- Working range 5,5 – 34 mm
- Wire passing speed up to 4 m/sec
- Fully autonomous
- TCO (Total Cost of Ownership): < € 3 a ton (metric)
Frequently Asked Questions
Do we need to purchase brushes from WiTechs, or can we source them locally?
Purchasing descaling brushes from WiTechs ensures the highest cleaning quality. However, the brushes can also be sourced locally. Because brush wear is minimal, investing in more expensive, higher-quality brushes can definitely be worthwhile.
How does the machine know the position and when to adjust?
The machine detects brush pressure through the current draw of the drive motor. In this way, the machine ensures a continuous descaling process with minimal brush wear. Brush life exceeds 2,000 metric tons.
How is the machine’s ROI determined?
The ROI depends on many factors, especially the savings from reduced downtime and the lifespan of the drawing dies. In addition, the total cost of ownership (TCO) of current descaling methods can be compared, making the investment decision very straightforward.