In-feeding and Reverse Bending Descaling Machine

2 December 2020

In-feeding and Reverse Bending Descaling Machine, model BDM-2S/EG (available from stock)

For HC wire rod dia. Ø 5.0 – 15.0 mm

  • Hydraulically in-feeding system
  • Reverse-bending unit with:
  • Horizontal and vertical bending planes
  • 7 bending rolls for each module (outer-Ø 140 mm)
  • 4 rolls in fixed position
  • 3 rolls separate hydraulically adjustable with mechanically adjusted stops
  • All rolls with changeable HM-insert

Machine:

  • Dimensions L/W/H 2,425 / 866 / 1,550 mm
  • Gross weight approx. 2,500 kg
  • Wire passing height 1,250 mm
  • Voltage / frequency 415 V / 50 Hz (changeable if necessary)
  • Wire passing direction, right to left
  • Electrical wired on terminal box and bus modules (without PLC and operating panel)
  • Hydraulically installed (excl. hydraulic drive)
  • Inlet funnel
  • Outlet HM-guiding die
  • 2 moveable scale container
  • Suction connectivity
  • Prices on request